[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
show ip tunnel-route
Syntax
show ip tunnel-route [ vrf vrfName ] [ destination [ ipMask ] [ detail ] ]
[ all ] [ protocol ] [ filter ]
Release Information
Command introduced in JUNOSe Release 7.1.0.
Description
Displays current state of the IPv4 tunnel routing
table.
Options
-
vrfName—Contents of the IPv4
tunnel routing table associated with a VRF
-
destination—IP address or
domain name of the host to show
-
ipMask—IP mask of the specific
address to show
- detail—Displays detailed information about the specific
prefix
- all—Displays all routes in the IPv4 tunnel routing
table inserted from all protocols, not just the best routes
-
protocol—One of the following
protocols for which you want to display the best route or all routes
in the tunnel routing table; no routes are displayed if routes for
the specified protocol are not present in the tunnel routing table
 |
Note:
Other protocol options are available in the CLI, but they
are not applicable to the tunnel routing table.
|
- bgp-tunnel—Displays the BGP tunnel routes in the
tunnel routing table
- ldp—Displays the LDP tunnel routes in the tunnel
routing table
- rsvp—Displays the RSVP tunnel routes in the tunnel
routing table
-
filter—See Filtering show Commands
Privileged Exec, User Exec
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
